Smart Service

Checklist

Thermostat

Air Filter

Bearing

Condenser Coil

Drain

Refrigerant

Wiring

Capacitors

Fan Blade

Service Valves

Supply/Return

Ducting

Compressor

When Smart Chill trained

technicians perform a tune-up

we guarantee you will save on energy costs

  1. Blower Motor: measure amperage and voltage for proper operation

  2. Thermostat: test for proper operation, calibrate and level

  3. Clean existing air filter (as needed)

  4. Bearing: inspect for wear and lubricate

  5. Inspect indoor coil

  6. Condensate Drain: flush and treat with anti-algae

  7. Inspect Condenser Coil

  8. Refrigerant: monitor operating pressures

  9. Safety Devices: inspect for proper operation

  10. Electrical Disconnect Box: inspect for proper rating and safe installation

  11. Electrical Wiring: inspect and tighten connections

  12. Test/inspect contactors for burned, pitted contacts

  13. Inspect electrical for exposed wiring

  14. Inspect and test capacitors

  15. Inspect fan blade

  16. Clean condenser coil and remove debris

  17. Inspect service valves for proper operation

  18. Measure Supply/Return temperature differential

  19. Inspect duct work for energy loss

  20. Compressor: monitor, measure amperage and volt draw and wiring connectors

Book an $80 basic service today.

Wall Mounted Split System

Book a $150

Full Dismantle Clean & Sanitise.

Wall Mounted Split System